How to unclog a vacuum hose | Step By Step Guideline
So, you got a clogged hose? No worries! Here’s how to fix it.
If you do not maintain or clean your vacuum cleaner regularly, it will start to show any issues. Some issues include overheating, blowing out dust, losing suction, etc. If these issues persist, you will have to work harder when using the vacuum.
One of those issues is your vacuum losing the suction. If your vacuum cleaner loses suction, then chances are that the vacuum hose is clogged. A clogged vacuum hose can be cleaned easily with a bent wire, or a broom.
Table of Contents
- How Would You Know that Your Vacuum Is Clogged?
- Steps to Follow for Unclogging the Vacuum Hose
- Bottom Line
How Would You Know that Your Vacuum Is Clogged?
- Your vacuum cleaner isn’t picking up dirt as much as it used to.
- You may have tried cleaning or replacing the filter or the bag. But, the problem persists still.
- The attachment has no suction. The suction port is clogged.
If the conditions described above are true for you, chances are your vacuum is clogged. Here’s what you can to do to fix this problem.
- A garden hose
- A clean cloth
- A Dryer Sheets
- Wire hanger
Steps to Follow for Unclogging the Vacuum Hose
Step 1 – Unplug the vacuum
Step 2 – Is the vacuum really clogged?
Before assuming that the hose is clogged, find out where the clog is. If the vacuum hose is really clogged, your vacuum won’t pick up the dirt as much as it used to. If you still want to be sure of the clog, you can carry out a little experiment.
Here’s what you can do:
- Release the hose from the attachment and the vacuum itself
- Keep the hose upright and pass something small down the hose
- You may choose to drop a little coin down the hose
- If the coin makes its way to the other side, then you know the hose is clear
- If the coin doesn’t make it, evidently the hose is clogged
Step 3 – Unclip the vacuum tube
So, you are sure of the fact that the vacuum hose is clogged. Now it’s time to get to work. Remove the tube from the vacuum cleaner. Many of us have a cylindrical cleaner. If you also have such a cleaner, it is almost certain that the vacuum tube is blocked. So, the first task is to remove the tube.
Step 4 – Inspect
Once you have removed the tube from the vacuum machine, now it’s time to examine the tube. Hold the tube and try to look into the tube. If the hose doesn’t offer a clear path, then it’s clear that it is clogged.
Or, you can carry out the experiment discussed in Step 2.
Step 5 – Thrust the Clogs
Now take a wire hanger, then set the wire straight. Then, insert it into the vacuum hose. And, try to poke through the hose as needed. Poking into the vacuum is supposed to unblock the solid waste that gets clogged in the pipe.
While poking through the pipe, it is important that you take in a gentle procedure. If you get rough with the procedure, it may puncture the pipe. Then, it will get costly.
Step 6: Clean the vacuum hose
Now it’s time to use a broom. Use dry sheets to wrap the broom with. You can use tape to aid the wrapping. Now with the help of the broom handle, start cleaning the inside of the hose. When cleaning, make sure you approach the cleaning with tender care.
Use smooth and gentle movement of your wrist to avoid any damage or crack to vacuum hose.
Step 7 – Sanitization
The foul smell may be lingering around the hose. If you want to disinfect the hose or rid it of the awful smell, a solution awaits you. Vinegar has numerous benefits besides being an accessory for preparing delicious food.
Prepare a solution with vinegar and water to remove the foul smell. Prepare a solution with 1/3 rd vinegar and 2/3 rd water.
Wrap paper towels around the broom. Now sink the broom in the diluted solution. Then, move the broom inside the mob. Use gentle motions when moving. Don’t force hard, lest it should damage anything.
Now you have to wait until the vinegar has dried completely. Try to smell the mob for vinegar. If the mob has no vinegar odor lingering, then it is obvious that the vinegar dried out. Once confirmed, you can get to use the vacuum mob.
Step 8 – Remove annoying stuff
The beater brush of your vacuum cleaner is likely to get stuck with hair, thread, yarn. It is important that you remove such things. Use scissors or cutter to remove such things.
Step 9 – Sanitize Other Accessories
You may not like cleaning the vacuum three to four times a week. Therefore, you may want to clean other auxiliary parts before putting it back. Spray the vinegar solution you have prepared earlier on to the beater brush and other parts.
Do not spray the vinegar solution to the rubber belt or rubber composite parts of the vacuum body.
Do not plug the vacuum cleaner in until all parts of it dried up completely.
Vacuum cleaners look rugged and menacing on the exterior, but inside, they can be as fragile and sensitive any other electronic appliance. As a result, vacuum cleaners need to be taken care of and maintained carefully. Learn how to clean your unclogged hose from this article.