How to get hair dye out of carpet

It’s a lot of fun to dye your hair at home. What’s not enjoyable is when you spill hair color on the carpet. Hair dye may create a noticeable mark on your floor covering due to the coloring ingredients in it.

Furthermore, it is regarded as one of the most challenging stains to remove. As a result, you must understand how to get hair color out of the carpet so that you can altogether remove the stain. You can attempt a variety of cleaning procedures to remove hair color from the rug. The system used may be determined by the carpet fibers’ material, the type of hair color used, and the state of the stain itself.

how to get hair dye out of carpet

Always mind the two fundamental laws of color removal, regardless of the technique you use. First and foremost, clear the discoloration as quickly as possible.

Second, always test the cleaning solution on a tiny section of the carpet before using it on the discolored area. This ensures that the cleaning chemical you’ve chosen is safe to use and will not harm the carpet fibers.

Below we will be discussing various methods that can help you remove hair dye from carpet quickly and efficiently.

Method 1: Rubbing Alcohol, Vinegar, and water

The removal of the hair dye from the tap may be done by creating an extra cleaning solution of White Vinegar and fluid dish Soap. Mix a tablespoon of white vinegar, a tablespoon of liquid dish soap, and two cups of water to produce the solution.

Ingredients:

Step 1:

Combine soap, water, and white vinegar. Pour 2 cups (0.47 L) warm water into a big basin or jug. 1 teaspoon (15 mL) dishwashing solution and one teaspoon (15 mL) white vinegar Combine the components.

Step 2:

With a soft cloth, wipe the solution onto the stain. Immerse a clean cloth in the stain remover. To avoid soaking the carpet, wring out the fabric. Instead of rubbing the paint, gently massage it with the towel to bury it further into the carpet strands

Step 3:

As you purify, blow the discoloration with a dry towel. Use a clean, dry towel to blow the space when the cleaning liquid is applied to the hair dye stain. Some of the color loosened by a cleansing mix should take up that dry towel. Alter the cleaning fluid and load it with the dry towel till the spot is gone.

Step 4:

Make sure you use the fabric you don’t care about becoming soiled.

Step 5:

Sponge the area and wipe it with a dry towel with water. After removing the stain, dust in clean water the area with a sponge. Wet the region as a whole. To pull the water out of the carpet, use a clean, dry towel.

Step 6:

If required, use alcohol rubbing. If hair color residues are lingering, attempt to loosen with rubbing alcohol. Put it on a clean tissue and wipe it. Repeat until the stain has been gone.

remove hair dye from carpet

Method 2: Using an Ammonia Solution

Ammonia is an excellent remover of hair dye. However, this chemical material cannot be used on a wool-made tapestry since it damages the natural fibres.

Ingredients: 

Step 1:

Initially, combine in a bowl or large container one teaspoon of dish soap and one tablespoon of ammonia into two cups of warm water. Open the windows and doors in your home to improve airflow to avoid ammonia sickness.

Step 2:

Subsequently, dip a clean towel and stain it with the hair-painted tissue. Before doing so, make sure you wear gloves because ammonia is poisonous and damaging to your skin

Step 3:

Cover with this solution the whole discolored area and allow it to lie for half an hour. Do not let children and animals close to the tap at this period.

Step 4:

Take a clean towel or sponge the solution after 30 minutes and put it on the discolored area. Put your cloth on the carpet, if necessary. Five minutes, let it sit. Continue to repeat this procedure until the color is over.

Step 5:

Then dip a sponge or dry cloth into the water and wipe the area to eliminate the solution of excess ammonia. Once the moisture has been removed, let the tapestry air dry for the whole day. Turn the fans on to accelerate the process, if feasible.

 

Method 3: Hairspray and Astringent

It sounds stupid to use another hair product to cure sprayed hair products. But for dye, tapestry removal is highly effective. Hairspray. To improve your outcome, you may mix it with astringent. Here are the measures you must take. 

Ingredients:

  • Hairspray
  • Water
  • Astringent
  • Cloth
  • Sponge

Step 1:

Sprinkle some hair spray droplets onto the stained surface. Make sure the stain is fully coated.

Step 2:

Allow 5 minutes to remain. Then rinse with cold water the discolored area.

Step 3:

Now use an astringent solution over the top. Leave it for five minutes longer.

Step 4:

Firmly dab the stain to absorb the hairspray and astringent ingredients into the tissues/cloth.

Method 4: Hydrogen Peroxide

The efficient hydrogen peroxide is beneficial in the purification of obstinate tinting on the white tapestry. You should, however, use it carefully because it has potent chemicals. It would help if you took these procedures when you clean the tin with hydrogen peroxide on your carpet.

Ingredients:

  • Hydrogen Peroxide
  • Sponge/Cloth

Step 1:

Cover the stained area with Hydrogen peroxide.  A teaspoon or an eyedropper can be used for easy application.

Step 2:

Leave for 24 hours on teh carpet.

Step 3:

Dab with a damp cloth or sponge once the carpet dries out. 

Step 4:

Dry the carpet using an electric fan. 

Conclusion: How to remove hair dye from carpet...

I personally would typically use method 1 or method 2 to remove hair dye from carpet. I just feel like these at the most reliable methods, that I have used time and time again for various stains at clients (and my own house). 

In my garage, on some test carpet, I gave the other two methods a go with fairly good results. So if it’s these ingredients that you have on hand you may well be fine going down this path too. 

Good luck!